Mount Factory Articulating Tilting TV Wall Mount For 40 in. - 65 in. TVs

This articulating, tilting TV wall mount is for LED, LCD, Plasma and other flat panel displays measuring between 40 - 65 inch diagonally. The mount fits many sizes and supports VESA mounting standards of 100mm x 100mm, 100mm x 200mm, 200mm x 200mm, 300mm x 300mm, 200mm x 400mm, 400mm x 400mm, and 400mm x 600mm. The easiest way to ensure fit of the mounting pattern is to find out the VESA pattern for your panel either online or by measuring between the screw holes on the rear of the TV or panel (100mm is about 4 inches). They should be no more than 24 inches apart horizontally and up to 15.75 inch vertically. Mount compresses to 3 inches and extends up to 17.5 inches from wall. Articulating arm will also allow for offset mounting, where the panel (when extended out on the arm) can be shifted horizontally up to 12 inches left or 17 inch right. Features easy installation: simply mount the separate arms to the back of your TV, then mount the back plate to the wall, lastly lift the panel onto the back-plate and tighten the security bolts, locking the TV into place. Also allows you to adjust the display level after the mount has been placed on the wall, allowing you to achieve an absolutely perfect and level installation. The back plate features integrated stops, which protect the TV from moving horizontally off the mount. Specifications: Fully rated for up to 110 pound displays; Tilts from 0 degrees (vertical) to 12 degrees (down/forward); Swivels up to 90 degrees; RoHS, CE, and ISO-9001 certified; Complete mount package includes pre-assembled, 12-gauge powder-coated, heavy-duty steel mount, installation instructions, and full hardware package with stud wall screws, masonry anchors, mounting screws, washers, and spacers. Item ID: 10660
In stock
  • Universal fit - designed to hold most LED, LCD, Plasma TVs, and other flat panel displays
  • Sturdy - True rated capacity of 110 pounds
  • Articulating - Smooth, full-motion design allows for tilting, panning and extension of mounted TV panel. Makes it easy to set the perfect viewing angle
  • Panning - Allows panel to rotate up to 45 degrees left or right
  • Extension - Allows panel to compresses to 3 inches and extends up to 17.5 inches from wall
  • Easy installation - simple lift/hook/lock system allows for quick mounting in 3 easy steps
  • Pre-assembled - Both mounting arms and the articulating back plate are separately pre-assembled right out of the box, saving time and hassle during installation
  • Safety features - Two security bolts lock your TV in place, eliminating shifting and protecting against accidental falls. Back plate features integrated stops, which protect the TV from moving horizontally off the mount
  • Tilt adjustment - Viewing angle can be set from vertical to +15 degrees (panel tilted down/forward)
  • Cable management - Openings in back plate provide space to pass cables
  • Premium quality - Constructed from commercial-grade, 12-gauge, heavy-duty steel. Smooth high-quality barrel-hinges. Certifications: RoHS, CE & ISO-9001
  • 6" level - Designed to make installation easier, this level allows you to make adjustments to achieve a perfectly level installation
  • Bonus HDMI cord - 10' HDMI braided nylon cord with gold plated connectors
More Information
Manufacturer Mount Factory
Write Your Own Review
You're reviewing:Mount Factory Articulating Tilting TV Wall Mount For 40 in. - 65 in. TVs

1 Year Limited Product Warranty

We provide a limited warranty that covers defects of your machine caused by material or manufacturing faults. The warranty period is for 1 year and begins on the date of purchase by the original end user. This limited warranty is made only to the original purchaser of the machine, and is not transferable to any subsequent owner.

In the rare event that a machine requires repair, we will, at our option, repair or replace the defective component(s) free of charge, provided that we are notified of the defect during the warranty period and a dated proof of purchase is furnished. We reserves the right to inspect the faulty component(s) and determine if the defect is due to material or manufacturing flaws. We also reserve the right to charge for service time expended if the defect is not due to material or manufacturing flaws, or is not for some other reason, subject to this limited warranty.

Exclusions: We do not warrant machines from any defects or damage caused by:

  • Normal wear and tear
  • Shipping or transportation damages
  • Improper installation
  • Exposure to unsuitable environmental conditions (including but not limited to damage due to lightning strikes)
  • Unauthorized or abnormal use or operation
  • Negligence or accidents
  • Material or workmanship not provided by us
  • This warranty does not cover costs related to the removal, installation, or troubleshooting of any machine

We will, at its option, use new, reconditioned, or other available parts in performing warranty repair and in building replacement products. We reserves the right to use parts or products of original or modified design in the repair or replacement. If we repair or replace a product, its warranty continues for the remaining portion of the original warranty period.

All replaced products and all parts removed from repaired products become the property of our company. We cover both parts and labor necessary to repair the product. Shipment to our facility and return shipment to the customer, via our selected non-expedited freight carrier, is the responsibility of the product owner. The warranty does not cover any cost associated with installation, removal or re-installation of the vibration machine. Please contact us for further questions regarding your warranty at, or by mail to 6201 N. Nob Hill Road, Tamarac, FL 33321.